PAKER PAV10 Piston Pump

N1:22.225 mm; Ca:70.104 mm; P180°:48.9 kN; R2:30.163 mm; R1:65.088 mm; RG:3/8 NPT; Housing:SAW 520; J max.:333.375 mm; Appropriate attachment bolt size G:0.75 in; Taconite seal:2 x TER 100;

Oil:4 200 min-1; Pu:4.200 kN; D1:42 mm; Grease:3 200 min-1; dynamic Cr:48.400 kN; rs (min):1 mm; d:40 mm; D:68 mm; H:19 mm; static Cor:92.400 kN;

B2:24 mm; B1:12 mm; d:180 mm; d1 ≈:229.3 mm; r3,4 min.:4 mm; Mass angle ring:1.9 kg;

d:400 mm; ra max.:3 mm; Mass bearing:57 kg; s max.:0.9 mm; da max.:430 mm; d1 ≈:448 mm; Limiting speed:1600 r/min; Calculation factor kr:0.15; B:82 mm; Reference speed:1200 r/min;

Pu:6150 kN; d:480 mm; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; with cylindrical bore:300 min-1; with tapered bore:350 min-1; Oil:825.230 kN; D:790 mm; rs (min):7.5 mm; B:248 mm;

d:220 mm; d1 ≈:262 mm; r3,4 min.:3 mm; B1:14 mm; B2:27 mm; Mass angle ring:2.16 kg;

B5:77 mm; h:18 mm; G:Tr 380x5; d1:438 mm; Associated eyebolt for handling:M 10; d3:490 mm; Mass lock nut:28.5 kg; Lock washer / Locking clip:MS 3176; b:32 mm; B:60 mm;

rs (min):1.5 mm; Static (Coa):29.9 kN; Pu:3.650 kN; B:15 mm; r2s (min):0.6 mm; C:13 mm; r1s (min):1.5 mm; D:52 mm; d2:20 mm; T:16.25 mm;

Da:419.999 mm; PG:1/4 NPT; End plug (suffix Y):EPR 21; P150°:222 kN; h:87.313 mm; Cap bolt, SAE grade:8; P120°:249 kN; Cap bolt:4 x 1 1/2-6 UNC; PosiTrac Plus contact element:2 x B10724-161; A2:317.5 mm;

h:46.831 mm; Max. speed for PosiTrac Plus seal:1350 r/min; A1:120.65 mm; H1:133.35 mm; Pa:20.7 kN; A2:190.5 mm; H:257.175 mm; Mass pillow block:64 kg; S:4.763 mm; Eye bolt:2 x 3/8-16 UNC;

H1:133.35 mm; Cap bolt recommended tightening torque:1220 N·m; A2:187.325 mm; P60°:185 kN; da:84.138 mm; A1:120.65 mm; Da:215.001 mm; P90°:111 kN; P180°:81.4 kN; h:55.563 mm;

Sealed Speed Rating n3:2800 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:186000 N; D:150.0000 mm; Oil Speed Rating n2:3800 rpm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:172000 N; d:70.000 mm; Grease Speed Rating n1:2800 rpm; B:63.50 mm;

Mass pillow block:316 kg; h:73.025 mm; da:252.412 mm; R2:50.8 mm; Eye bolt:2 x 1/2-13 UNC; H2:101.6 mm; H1:250.825 mm; Da:419.999 mm; R1:163.512 mm; Cap bolt recommended tightening torque:4284.4 N·m;

Oil Speed Rating Open/Shielded n2:6300 rpm; B:27.00 mm; d:50.000 mm; D:110.0000 mm; Grease Speed Rating Open/Shielded n1:5200 rpm; Basic Dynamic Radial Load Rating C:64400 N; Basic Static Radial Load Rating Co:52000 N; Accessories:Without Accessories; Fillet Radius ra:2.00 mm;

Grease Speed Rating Open/Shielded n1:2100 rpm; Basic Dynamic Radial Load Rating C:251000 N; B:60.00 mm; Basic Static Radial Load Rating Co:300000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; Accessories:One Shield; d:100.000 mm; D:265.0000 mm;