COMMON RAIL DLLA149P1813 injector

Ball Grade:Class 24; Expansion Type:Non-Expansion; Base to Center Height:Not Applicable; Housing Type:2 Bolt Flange; Bearing Insert Material:Nickel-Coated Steel; d:1.5000 in; Grease Type:Mobilgrease FM222; Ring Size:Standard; Flinger Type:INTERNAL RUBBER LIP; Housing Material:Polymer;

Recommended tightening torque for set screw:8 Nm; G:R1/8"; C0:15.2 kN; Z:50.7 mm; A:36 mm; A1:12.5 mm; Dz:80 mm; J:92 mm; C:25.7 kN; T min.:-20 °C;

C0:7.88 kN; d:23.81 mm; L2:10 mm; A2:24 mm; Weight:0.84 kg; H2:51 mm; A1:12 mm; T max.:100 °C; s1:17 mm; G:M6x1;

H:68.3 mm; N1:29.1 mm; H2:138.1 mm; T max.:100 °C; A1:50.8 mm; Designation of housing:PLE212-; A:79.4 mm; Weight:5.83 kg; d:60 mm; J:193.7 mm;

d:57.15 mm; C:52.5 kN; A:53.5 mm; Weight:4.6 kg; A1:16 mm; B:53.7 mm; A2:72.8 mm; Designation of housing:FE212N-; s1:26.85 mm; N:18mm;

Characteristic inner ring frequency, BPFI:8.38 Hz; Brand:SNR; Number of lubrication holes:3; k:4 mm; D1:111.9 mm; B:46 mm; d2:75.3 mm; Characteristic outer ring frequency, BPF0:5.62 Hz; Characteristic cage frequency, FTF:0.4 Hz; Radial clearance class:CN;

B:32 mm; N:11,5mm; d:36.51 mm; G:M6x1; s1:16 mm; H3:90; T max.:200 °C; e:1 mm; Recommended tightening torque for set screw:8 Nm; A:21 mm;

Other Features:Deep Groove | Prelub; Mass:1.15 kg; UNSPSC:31171504; Internal Special Features:No; Bore:4.724 Inch | 120 Mil; Noun:Bearing; Category:Single Row Ball Bear; Max operating temperature, Tmax:120 °C; d:120 mm; D:165 mm;

T max.:100 °C; Recommended tightening torque for set screw:8.3 Nm; Designation of bearing:SES207; A:48 mm; C0:15.6 kN; d1:55.6 mm; S:8.5 mm; H:47.6 mm; B:25.4 mm; Designation of housing:SPA207-;

d:80.96 mm; L:240 mm; A1:18 mm; G:M10x1; Designation of housing:FC216-; Weight:8.99 kg; s1:41.3 mm; S:33.3 mm; e:18 mm; H3:170;

e:19 mm; T max.:200 °C; s1:17 mm; Designation of bearing:UC205-16G2T20; J:99 mm; N:11,5mm; d:25.4 mm; A:29.3 mm; Weight:0.6 kg; T min.:-20 °C;

Designation of housing:SPA207N-; Designation of bearing:SUC207; H1:12 mm; A:48 mm; B:42.9 mm; T min.:-20 °C; H2:95 mm; C:20.1 kN; s1:21.45 mm; T max.:100 °C;

Precision Class:RBEC 1 | ISO P0; Noun:Bearing; UNSPSC:31171547; Characteristic rolling element frequency, BSF:4.86 Hz; Profile:Complete with Outer; Relubricatable:Yes; Characteristic outer ring frequency, BPF0:5.22 Hz; Cage Material:Nylon; Dynamic load, C:110 kN; Inch - Metric:Metric;

A1:16 mm; H:150 mm; A2:50.2 mm; J:160 mm; Weight:2.15 kg; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; A:33 mm; e:19.2 mm; N:14mm;